收藏本站
Tantalum Surface Mount Capacitors – Standard Tantalum
T491 Industrial Grade MnO 2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T 2
?Do
P 2
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E 1
Ao
F
B 1
Ko
Bo
E 2
W
S 1
P 1
T 1
?D 1
User Direction of Unreeling
Center Lines of Cavity
Cover Tape
B 1 is for tape feeder reference only,
including draft concentric about B o .
Embossment
For cavity size,
see Note 1 Table 4
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
16 mm
D 0
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
D 1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
E 1
1.75 ±0.10
(0.069 ±0.004)
P 0
4.0 ±0.10
(0.157 ±0.004)
P 2
2.0 ±0.05
(0.079 ±0.002)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S 1 Minimum
Note 3
0.600
(0.024)
T Maximum T 1 Maximum
0.600 0.100
(0.024) (0.004)
Tape Size
8 mm
12 mm
16 mm
Pitch
Single (4 mm)
Single (4 mm) &
Double (8 mm)
Triple (12 mm)
B 1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Variable Dimensions — Millimeters (Inches)
E 2 Minimum F P 1 T 2 Maximum
6.25 3.5 ±0.05 4.0 ±0.10 2.5
(0.246) (0.138 ±0.002) (0.157 ±0.004) (0.098)
10.25 5.5 ±0.05 8.0 ±0.10 4.6
(0.404) (0.217 ±0.002) (0.315 ±0.004) (0.181)
14.25 5.5 ±0.05 8.0 ±0.10 4.6
(0.561) (0.217 ±0.002) (0.315 ±0.004) (0.181)
W Maximum
8.3
(0.327)
12.3
(0.484)
16.3
(0.642)
A 0 , B 0 & K 0
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B 1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defi ned by A 0 , B 0 and K 0 shall surround the component with suffi cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
? KEMET Electronics Corporation ? P.O. Box 5928 ? Greenville, SC 29606 (864) 963-6300 ? www.kemet.com
T2005_T491 ? 10/8/2013
18
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
T521D107M016ATE050 CAP TANT 100UF 16V 20% 2917
T525D337M006ATE040 CAP TANT 330UF 6.3V 20% 2917
T620162004DN SCR PHASE CTRL MOD 1600V 200A
T68-1/M TERMINAL MINIWRAP .042" GOLD
T6V0S5-7 TVS 260W 6.0V SOD-523
T720224504DN SCR PHASE CTRL MOD 2200V 450A
T7H8146504DN SCR PHASE CTRL MOD 1400V 650A
T7H8166504DN SCR PHASE CTRL MOD 1600V 650A
相关代理商/技术参数
T491X107K025AT2478 制造商:KEMET Corporation 功能描述:100.UF 25.0V 制造商:KEMET Corporation 功能描述:100.UF 25.0V - Tape and Reel
T491X107K025AT4393 制造商:KEMET Corporation 功能描述:100.UF 25.0V - Boxed Product (Development Kits)
T491X107K025AT4394 制造商:KEMET Corporation 功能描述:100.UF 25.0V - Boxed Product (Development Kits)
T491X107K025AT7283 制造商:KEMET Corporation 功能描述:100.UF 25.0V - Tape and Reel
T491X107K025ZT 功能描述:钽质电容器-固体SMD 25volts 100uF 10% RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk
T491X107K025ZT7280 制造商:KEMET Corporation 功能描述:Cap Tant Solid 100uF 25V X CASE 10% (7.3 X 4.3 X 4mm) SMD 7343-43 0.3 Ohm 125 制造商:KEMET Corporation 功能描述:Cap Tant Solid 100uF 25V X CASE 10% (7.3 X 4.3 X 4mm) SMD 7343-43 0.3 Ohm 125°C T/R
T491X107K025ZTZ123 制造商:KEMET Corporation 功能描述:100.UF 25.0V
T491X107M010ZT 功能描述:钽质电容器-固体SMD RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk